New England Ropes Solid White Endura Braid - 10mm - 600 Feet

SKU
2510-10-600-1
Brand
New England Ropes
Get Best Price

Online Ropes

Since 2009

To order click on the "Get Best Price" button. Fill out the information and click submit. We will get back to with a quote for your order.

Product Description:
Specially engineered 12 Strand Dyneema SK 75 core with Marine-Tech coating and the sports best 24 carrier braided polyester cover.

Features:

  • Excellent strength-to-size ratio
  • Ultra low elongation
  • Excellent wet/dry strength retention

Applications:

  • Sheets
  • Halyards
  • Guys
  • Topping lifts
  • Reef Lines
  • Low-stretch control lines

Lengths Available:

  • 600'
SizeWeightTensile
lbs/100'g/mlbskg
 3/16" (5mm)  1.0  14.9  3,100  1,405
 1/4" (6mm)  1.9  28.5  4,500  2,045
 5/16" (8mm)  2.7  40.2  8,100  3,680
 3/8" (10mm)  4.5  67.0  11,000  4,995
 7/16" (11mm)  5.5  81.8  14,900  6,765
 1/2" (12mm)  6.7  99.7  21,500  9,755
 9/16" (14mm)  8.6  128.0  25,200  11,441
 5/8" (16mm)  11.7  174.1  29,000  13,155
 3/4" (18mm)  15.8  235.1  40,000  18,175
 7/8" (22mm)  20.0  297.6  53,000  24,062
 1" (24mm)  26.0  386.9  70,000  31,760
 1 1/8" (28mm)  35.3  525.3  90,200  40,925

Sunlight/UV:
Very little degradation from sunlight. Can be used outside over long term if inspected regularly.

Chemicals:
Polyester has good resistance to most chemicals except 95% sulfuric acid and strong alkalines at boil. HMPE has good resistance to most minerals, organics, acids, and weak alkalines. HMPE also has excellent resistance to bleaches and other oxidizing agents and to most solvents.

Heat:
Polyester melts at 480°F with progressive strength loss above 300°F. HMPE melts at 300°F with progressive strength loss above 150°F.

Dielectrics:
Good resistance to the passage of electrical current. However, dirt, surface contaminants, water entrapment, and the like can significantly affect dielectric properties. Extreme caution should be exercised any time a rope is in the proximity of live circuits.

Sheaves:
Recommended sheave diameter to rope diameter is 8:1.

Working Loads:
No blanket safe working load (SWL) recommendations can be made for any line because SWL's must be calculated based on application, conditions of use, and potential danger to personnel among other considerations. It is recommended that the end user establish working loads and safety factors based on best practices established by the end user's industry; by professional judgment and personal experience; and after thorough assessment of all risks. The SWL is a guideline for the use of a rope in good condition for non-critical applications and should be reduced where life, limb, or valuable property is involved, or in cases of exceptional service such as shock loading, sustained loading, severe vibration, etc. The Cordage Institute specifies that the SWL of a rope shall be determined by dividing the Minimum Tensile Strength of the rope by a safety factor. The safety factor ranges from 5 to 12 for non-critical uses and is typically set at 15 for life lines.

Splicing Instructions:
Core-to-Core Splice

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account