Additional Information

Additional Information
  • Home

Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait... hand-picked cordage from the world’s best rope manufacturers – at discount prices.
  • My Account

New England Ropes Regatta Lite


New England Ropes Regatta Lite

Price: $0.48

Product Description

Lightweight and great to handle! A 12-strand, single braid, multi-filament polypropylene line.

Benefits: Extremely lightweight (either wet or dry), does not kink and is easy to handle.

Applications: Dinghies/small keel boats, mainsheets, control line, larger boats, and halyard tails.


 1/4" (6mm)  1.3  19.3  1,050  475
 5/16" (8mm)  2.6  38.7  2,560  1,160
 3/8" (10mm)  3.5  52.1  3,200  1,450

Polypropylene is susceptible to UV degradation and should be inspected regularly if used outside over a long term.

Polypropyelene has excellent resistance to most acids and alkalines, except chlorosulphonic, concentrated sulfuric acids, and chlorinated hydrocarbons at 160°F. Polypropylene withstands most diluted bleaching solutions.

Polypropylene melts at 330°F with progressive strength loss above 200°F.

Good resistance to the passage of electrical current. However, dirt, surface contaminants, water entrapment, and the like can significantly affect dielectric properties. Extreme caution should be exercised any time a rope is in the proximity of live circuits.

Recommended sheave diameter to rope diameter is 8:1.

Working Loads:
No blanket safe working load (SWL) recommendations can be made for any line because SWL's must be calculated based on application, conditions of use, and potential danger to personnel among other considerations. It is recommended that the end user establish working loads and safety factors based on best practices established by the end user's industry; by professional judgment and personal experience; and after thorough assessment of all risks. The SWL is a guideline for the use of a rope in good condition for non-critical applications and should be reduced where life, limb, or valuable property is involved, or in cases of exceptional service such as shock loading, sustained loading, severe vibration, etc. The Cordage Institute specifies that the SWL of a rope shall be determined by dividing the Minimum Tensile Strength of the rope by a safety factor. The safety factor ranges from 5 to 12 for non-critical uses and is typically set at 15 for life lines.

Splicing Instructions:
12-Strand Eye Splice - Lock Stitch


Product Videos

Product Reviews

Find Similar Products by Category