Additional Information

Additional Information
  • Home

Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait... hand-picked cordage from the world’s best rope manufacturers – at discount prices.
  • My Account

New England Ropes Regatta Braid


New England Ropes Regatta Braid

Price: $0.59

Product Description


A 12-strand single braid made from spun and filament polyester.

BENEFITS: A soft and supple, easy-to-handle line that runs freely and does not kink.

MATERIAL: Polyester



Regatta Braid
Diameter [mm] Diameter [inch] Circumference [inch] Weight [g/m] Weight [lbs/100'] min. Breaking strength [lbf] Avg. Breaking strength
6 1/4   32,7 2,2   2.550
8 5/16   44,6 3   3.300
10 3/8   59,5 4   4.800
11 7/16   93,7 6,3   6.500
12 1/2   104,1 7   8.000
16 5/8   153,2 10,3   12.400


  • Soft
  • Durable
  • Supple
  • Kink free


  • Mainsheets
  • Furling lines

Colors Available:

  • White


Very little degradation from sunlight. Can be used outside over long term if inspected regularly.

Polyester has good resistance to most chemicals except 95% sulfuric acid and strong alkalines at boil.

Polyester melts at 480°F with progressive strength loss above 300°F.

Good resistance to the passage of electrical current. However, dirt, surface contaminants, water entrapment, and the like can significantly affect dielectric properties. Extreme caution should be exercised any time a rope is in the proximity of live circuits.

Recommended sheave diameter to rope diameter is 8:1.

Working Loads:
No blanket safe working load (SWL) recommendations can be made for any line because SWL's must be calculated based on application, conditions of use, and potential danger to personnel among other considerations. It is recommended that the end user establish working loads and safety factors based on best practices established by the end user's industry; by professional judgment and personal experience; and after thorough assessment of all risks. The SWL is a guideline for the use of a rope in good condition for non-critical applications and should be reduced where life, limb, or valuable property is involved, or in cases of exceptional service such as shock loading, sustained loading, severe vibration, etc. The Cordage Institute specifies that the SWL of a rope shall be determined by dividing the Minimum Tensile Strength of the rope by a safety factor. The safety factor ranges from 5 to 12 for non-critical uses and is typically set at 15 for life lines.

Splicing Instructions:
12-Strand Eye Splice - Bury


Product Reviews

Find Similar Products by Category